KIPI ecoMAX920 P1-CH, Operating And Installation Manual

Page: 20 / 34

20
Connecting the cables to the controller: 1 - cable
openings, 2 - placing clamps (they must be broken off),
3 - incorrectly connected cable (it is forbidden to wind
excess cables inside the device and leave wires without
wires), 4 - correctly connected cable, 5 - cable clamp , 6
- connector.
Separate electrical wiring from hot
stove components, especially flue
pipes.
After connecting the wires, it is absolutely
necessary to put the cover back in its place.
Always screw the terminal cover to
the housing. Apart from ensuring
the safety of the user, the cover
additionally protects the interior of
the regulator against hazardous
environmental conditions, ensuring
an
appropriate IP protection
degree.