Kioti DK90, Owner'S Manual

Page: 89 / 140

5
-24 DK90
ADJUSTMENT OF STABILIZER
Adjust the telescopic stabilizers to con-
trol horizontal sway of the implement.
(1) Telescopic Stabilizers (2) Pin
Attachment
Plow and
harrow
Rotavator,
mower,
hayrack and
cultivator
Adjustment of
stabilizers length
Loosen the stabilizers for
an attachment to sway
laterally by 50 to 60 mm.
(1.97 to 2.36in.)
Fasten lightly
S43O527A
1. Fix lower link (LH. RH) not to touch
with wheels when implement is not
attached.
2. Fix Top link into fixed bracket.
WHEN IMPLEMENT IS NOT AT-
TACHED
1. Extend or reduce Top link to adjust
the inclination of an attachment.
2. Fix Top link with fixed nut after ad-
justing top link.
3. The position for mounting Top link
varies depending on the kind of
attachment.
ADJUSTMENT OF TOP LINK
ADJUSTMENT OF LOWER LINK
Implement
Soil engaging
(plough etc)
Non-soil
engaging
(mower etc)
Stabilizer adjustment
Place pin in slotted hole
Place pin in a non slott-
ed hole so that imple-
ment cannot sway late-
rally.
WARNING
!!!!!
Stop the engine and lower the at-
tachment on the ground prior to
disconnecting the lift rod from
the lower link. Check that the at-
tachment for proper supporting
and there’s pressure remained in
the hydraulic system to remove
the lift rod holding the pin. To
eliminate the remained pressure,
move the hydraulic adjusting le-
ver back and forth several times.
And then move the lever com-
pletely to the front.