manualshive.com logo in svg

Kioti DK90, Owner'S Manual

Share
Download
Kioti DK90 Owner'S Manual Download Page 9

DK90

1

-4

A 

ROPS

 and 

CAB

 should never be

modified by welding, grinding or cutting,
as this can weaken the 

ROPS

structure. If any components of the

ROPS

 unit is damaged, it must be

replaced.

If the 

ROPS

 unit is removed or loos-

ened for any reason, the parts should
be fitted back to their original positions
and all bolts should be properly torqued.

Always use seat belt when the trac-
tor is equipped with a 

ROPS 

and

CAB

. All tractors in U.S. must

have 

CAB

 or 

ROPS

.

21. Extra caution should be taken when

driving tractors with narrow tread
widths. For added stability you
should adjust your rear wheel tread
width, see page 8-3.

19. Before starting your tractor you

should depress the clutch and
make sure that all shift levers are
in the neutral position.

20. For your safety 

ROPS

 with a seat

belt is recommended for most
applications.

(1) Tread

S43O106A

S43O107A

NOTE

Summary of Contents for DK90













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands