Kioti DK90, Owner'S Manual

Page: 113 / 140

6
-18 DK90
1. Stop the engine and remove the key.
2. Apply moderate thumb pressure to
the belt between pulleys.
3. If tension is incorrect, loosen the al-
ternator mounting bolts and, using a
lever placed between the alternator
and the engine block, pull the alter-
nator out until the deflection of the
belts falls within acceptable limits.
4. Replace the fan belt if it is damaged
or cracked.
ADJUSTING BRAKE PEDAL
1. Lightly press the center of the pedal
and measure the free play of the
brake pedal edge.
2. If needed, adjust the free play by
changing the length of linkage the
master cylinder .
3. After adjusting, tighten the lock nut
firmly.
(1) Brake Pedal
(A) Free play
S43O618A
Proper
fan belt
tension
A deflection between 0.
28 ~ 0.34 in.(7 ~ 9 mm)
when the belt is pressed
in the middle of the
span.
To avoid personal injury:
Be sure to stop the engine be-
fore checking belt tension.
(1) Adjusting Bolt
(A) Belt Tension
(B) To Tighten
ADJUSTING FAN BELT TEN-
SION
S43O626A
!!!!!
CAUTION