Kioti DK90, Owner'S Manual

Page: 85 / 140

5
-20 DK90
REMOTE HYDRAULIC SYSTEM
DEALING OF SINGLE-DOUBLE
ACTING VALVE (IF EQUIPPED)
MIXED CONTROL
In draft control, when draft decreases,
the implement automatically lowers to
increase draft. However, the implement
sometimes lowers too much. To limit
the degree, the implement can be
lowered, set the position control lever
at the lowest working depth desire for
the implement. Lower the draft control
lever to the point where the implement
is at the desired depth.
This stops the implement from going
too deep and causing loss of traction
and ground speed.
(1) Ground Surface (2) Soft Soil
(3) Implement Penetration Limit
The hydraulic lowering speed can be
controlled by adjusting the 3-point low-
ering speed knob.
(1) Hydraulic lowering speed knob
(A) (
) Slow (B) ( ) Fast
HYDRAULIC LOWING SPEED KNOB
To avoid personal injury:
Fast lowering speed may cause
damage or injury. Lowering
speed of implement should be
adjusted to two or more seconds.
!!!!!
CAUTION
S43O521A S43O522A
T85O523A