ZVFCV 39 / 42 / 47
S2PF Surrounds
–Installation-
NOTE: Safety Screen is NOT required to use these surrounds for ZVFCV Vent Free Fireplaces.
1.
Bend down Screen Tabs on top & Bottom of Surround.
2.
Fold Mount Tabs up 90°
3.
Install Upper Hooks and Lower Tabs.
4.
Bend Upper Hooks and Lower Tabs slightly inward.
1.
Back off screws in top inside corners of fireplace Frame until about
1/8” of thread is exposed.
Remove Access Cover. Completely remove screws from lower inside corners of fireplace frame.
To remove Surround,
WAIT UNTIL FIREPLACE IS COMPLETELY COOL.
Push up at center of Surround Frame and
pull bottom away from fireplace.
⚠
WARNING:
Wait until unit is
COMPLETELY cool
before or attempting to
install or remove
Surround.
4.
Swing Lower
Tab Mount into
frame of
fireplace below
Access Panel
support bracket.
Insert screws
and tighten.
Replace Access
Cover.
3.
Ensure Hood is
in place.
Push top of
surround up
against fireplace
and hook onto
screws in side
frame. Push
down to lock in
place.
47
