ZVFCV 39 / 42 / 47
Z46FK Optional Fan Kit Installation
NOTE: Thermodisc will NOT be used. See diagram below.
⚠
WARNING
⚠
WARNING
-Electrical Grounding Instructions-
This appliance is equipped with a three prong
(grounding) plug for your protection against shock
hazard and should be plugged directly into a
properly grounded three-prong receptacle. Do not
cut or remove the grounding prong from this.
Before Servicing
1. Ensure all power supply is shut off.
2. Label all wires prior to disconnecting when servicing
control. Wiring errors can cause improper and dangerous
operation.
3. For fan servicing: Vacuum and clean lint/dirt build-up on
the fan blades and motor.
1. Remove Fan Access Cover from back of firebox.
2. Insert Fan Assembly through opening.
3. Set Fan Housing onto Mount Tabs.
4. Route wires under Firebox to right side of Fireplace.
Connect leads from
Blower directly to
leads from Fan Speed
Control.
Use extra male
connector supplied in
Z46FK Fan Kit.
Thermodisc is NOT used
29
