Installing MQRB 3632 Liner Panels
There are several types of Liner Panels available for the MQRB3632:
-Flat Black False Bottom and Side Panels, -
Supplied with Unit
-Porcelain Side Panels-
MQRB36PL
Removal of Liner Panels
1. Remove all Doors from the fireplace by loosening bottom screws and removing the 2 screws on top of the unit.
2. Remove Side Panel(s) from inside of Firebox. (See
Fig.2
at bottom of page).
3. Remove screws from False Bottom and lift out of Firebox (See
Fig.1
below).
Installation of Porcelain MQRB3632 Liner Panels
.
1. Slide Side Panel(s) into place (See
Fig.2
below). Ensure fibre rope is on top.
2. Insert and tighten provided screws. Replace the Doors.
Note: Warping and
Discoloration of
Porcelain or Painted
Metal Liners Is Not
Covered Under
Warranty.
Both Porcelain and
Painted Metal Liners
may discolor and warp
during normal operation
of your appliance. This is
normal, and not
considered a defect
.
32
Summary of Contents for MDV31
