1. To install fan slide key hole mounts onto
both #8 screws, located rear bottom bracket.
2. The sensor (thermodisc) needs to be
secured under the firebox. The sensor must
be in direct contact with firebox bottom.
3. Install a junction box to bottom pan.
Refer to diagram for proper location. Power
cable to be routed through 6"x8" access hole.
4. Connect power, sensor and variable speed
wall switch as shown in wiring diagram.
SUGGESTED LOCATION FOR 120V
JUNCTION BOX FOR FAN KIT
SUGGESTED LOCATION FOR 120V
POWER CABLE
THERMODISC
BOTTOM OF
FIREBOX
FAN
GAS INLET
WALL MOUNTED
VARIABLE SPEED
CONTROL
OPTIONAL
IN UNIT
VARIABLE
SPEED
CONTROL
L/H FIREPLACE SHOWN
Fan Kit Installation
21
Summary of Contents for MDV31
