Kingsman marquis ZCV39LPE2, Installation Instructions Manual

Page: 63 / 95

ZCV39 / ZCV42 Burner Removal
To remove grate, remove two [2] screws
from grate bar assembly.
To remove burner, remove four [4] screws
from burner. Slide burner to the left and lift
to remove.
ZCV39 / ZCV42 Burner System Removal / Installation
Removal: Remove Log Holder. Remove fourteen [14] screws around edge of Burner Pan. Carefully work the burner pan
loose & lift the assembly upward to remove it from the firebox cavity.
Installation is the reverse of these steps. Ensure that the mounting surface is clean. Use fresh Black Mill Pac to reseal
the burner pan
.
- ⚠
WARNING -
Turn off Unit and allow to cool before
cleaning. Only a Qualified service technician
should service and repair this appliance.
- ⚠
WARNING -
Turn off Unit and allow to cool before
cleaning. Only a Qualified service technician
should service and repair this appliance.
Log Holder
Burner Pan
NOTE: Pilot connections through Burner Pan
must be sealed with Red Silicone.
63