Kingsman marquis ZCV39LPE2, Installation Instructions Manual

Page: 23 / 95

ZCV39 / ZCV42 Basic Finishing 2: With S1 or S1PF Surround
Step One: Frame Fireplace with nailing tabs oriented as
shown. Step Two: Use Drywall to finish face of wall.
NOTE: Drywall will be flush with fireplace face.
Step 3: Once wall is completely finished, Screen with Surround
may be installed. Surround will conceal edges of fireplace.
IMPORTANT NOTE!:
If installing tile, brick, or other non-
combustible material around the perimeter of the surround:
you MUST Leave 4” of the face exposed around the fireplace
opening on the Bottom and Sides, and 4-1/16” exposed on the
top. This is to install and remove the surround. See drawings
below. A Tile Lip Kit is Available. Part No. ZCV-TLK
Nailing Tab
4-1/16” MIN
ZCV39
Fireplace
Opening
Drywall
4” MIN
Fireplace Frame
Required
Clearance
S1 Surround
Drywall
S1 or S1PF Surround
Drywall
(Continued on Next Page)
Bottom of Unit
23