Kingsman Fireplaces Marquis MCVP42LP, Installation Instructions Manual

Page: 71 / 75

Power Vent Parts List – 5/8 Venting
NUMBER DESCRIPTION
PVH58
Horizontal Power Vent Starter Kit
‐
Exterior Mount
PVH58FM Horizontal Power Vent Kit
‐
Flush Mount
Note:
Must use a one foot section of 5/8 DV hard pipe to connect to the Power Vent Termination (not supplied)
CHOOSE CONTROL MODULE OR HARNESS DEPENDENT ON VALVE SYSTEM
PVC58MV Power Vent Control Module
‐
for Millivolt Models
PVC58IPI Power Vent Control Module
‐
for Proflame 1
‐
IPI Models
584
‐
X12 Harness for Proflame 2 IPI
‐
Deluxe Models
PVH20H Main Wiring Harness Assembly – Extension Harness (20ft)
CHOOSE VENTING TO BE USED:
SECTION 1: 5/8 HARD PIPE - SECTION 2: 4x6-5/8” HARD PIPE - SECTION 3: FLEX VENT
SECTION 1 DIRECT VENT HARD PIPE 5/8”– Used for entire installation – Order Z58DFA
Z58DFA Duravent Hard Pipe Adapter – 5/8” (Sloped Flue) Note: Only sloped flues require Z58DFA adapter.
SECTION 2 DIRECT VENT HARD PIPE 4 x 6-5/8”- Used for entire installation- Order ZDVDRA, ZDVDIA
Z58DFA Duravent Hard Pipe Adapter – 5/8” (Sloped Flue)
Note: Only sloped flues require Z58DFA adapter.
ZDVRA Duravent REDUCER- 5/8” to 4x6-5/8” ADAPTER (used at flue of fireplace) (
Models MQVL48/60
and ZCVRB60 will require a one-foot section of MG Hard Pipe at flue before using ZDVDRA)
ZDVDIA
Termination End
Duravent Pipe Increaser- at Power Vent
SECTION 3 FLEX VENT – Used for entire installation – order Z58PVA
Note: Must use a one-foot section of 5/8 DV hard pipe (not supplied) to connect to the Power Vent Termination.
Z58PVA Flex Pipe Adapter Kit - (to adapt flex pipe to power vent to hard pipe)
FLEX VENTING KITS
Z58FK5 Flex Kit (5” & 8” Dia.) x 2.5’ (Unexpanded) 5’ Expanded
Z58FK8 Flex Kit (5” & 8” Dia.) x 4’ (Unexpanded) 8’ Expanded
Z58FK20
Flex Kit (5” & 8” Dia.) x 10’ (Unexpanded) 20’ Expanded
*Kits are complete with spring stand-offs & silicone.
POWER VENT ACCESSORIES
ZDV5FC Flex Connector 5” Diameter
ZDV8FC Flex Connector 8” Diameter
ZDV5FCL Flex Clamp 5"
ZDV8FCL Flex Clamp 8"
ZDV4SS Spring 4" Standoff Spacer
PVH58WT Wall Thimble for Power Vent
71