MCVST42 / MCVP42
Main Burner Removal
If Glass Tray or Log Grates are installed, refer to MCVST42GT or MCVST42LG Installation / Removal page in this manual.
To remove burner, Lift
Pilot Shield off of Pilot.
Remove four [4]
screws from burner.
Slide burner away
from pilot and lift to
remove.
MCVP42
Burner System Removal / Installation
Removal: If Glass Tray or Log Grates are installed, refer to MCVP42GT or MCV42LG Installation / Removal page in this
manual. Then refer to Burner Removal instructions above to remove burner.
Remove fourteen [14] screws around edge of Burner Pan. Carefully work the burner pan loose & lift the assembly
upward to remove it from the firebox cavity.
Installation is the reverse of these steps. Ensure that the mounting surface is clean. Use fresh Black Mill Pac to reseal
the burner pan
.
-
⚠
WARNING
-
Turn off Unit and allow to cool before cleaning. Only a Qualified
service technician should service and repair this appliance.
-
⚠
WARNING
-
Turn off Unit and allow to cool before
cleaning. Only a Qualified service technician
should service and repair this appliance.
Burner Pan
NOTE: Pilot connections through Burner Pan
must be sealed with Red Silicone.
46
Summary of Contents for Marquis MCVP42LP
