Kingsman Fireplaces Marquis MCVP42LP, Installation Instructions Manual

Page: 16 / 75

MCVP42 Mantel Clearances
Mantel Leg Clearances
Adjacent Wall must be 1-
1/2” from standoff (2” from edge of front face frame).
Before installing any mantels it is
important to determine the combustibility
of its material(s). There are two types of
mantels to consider: Combustible and
Non-Combustible.
A Combustible Mantel is one that
consists of material(s) that may discolor,
combust, or lose its integrity in the
presence of heat. These types of mantels
must strictly conform to the dimensional
requirements shown.
Conversely, a Non-Combustible Mantel
is one that is constructed with material(s)
that will not combust. Check your local
codes and regulations to determine
whether your mantel is combustible or
Non-Combustible.
The advantage of a Non-Combustible
Mantel is that it can begin at the top of the
fireplace opening.
Combustible mantels must adhere to the
dimensional restrictions shown.
-Combustible Objects on Non-
Combustible Mantel Warning-
Combustible objects must not be placed
on a Non-combustible Mantel unless the
mantel meets the dimensional
requirements for a Combustible Mantel.
Determine whether your mantel
conforms to the requirements of a
Combustible Mantel.
Adjacent Wall
Adjacent Wall
Top View
Mantel
Dimensions are
from front face or
Non-Combustible
Facing Materials
covering fireplace.
Mantel begins 11-3/16
”
above top of fireplace
opening.
16