MP42PL
Porcelain Liner Installation
Instructions: (NOTE:
Porcelain Liners should be installed BEFORE Log Grates or Glass Tray.)
Step One:
Remove Main Burner (refer to
Burner Removal
section). If Log Grates or Glass Tray are installed, they
must be removed also.
Step Two:
Bend retainer clips away from firebox wall (See below).
Step Three:
Tilt and slide Liner against wall of firebox.
Use caution when moving liner over pilot area.
Step Four:
Bend retainer clips back to secure liner.
Step Five:
Reinstall all components.
MCVP42-H Ceramic Glass Units
Do not remove Baffle to install Porcelain Liners.
MCVP42 Tempered Glass Units
Do not remove Glass Heat Deflectors to install Porcelain
Liners.
⚠
WARNING:
Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury
.
⚠
Note: Warping and Discoloration of Porcelain or Painted Metal Liners Is Not Covered Under Warranty.
Both Porcelain and Painted Metal Liners may discolor and warp during normal operation of your appliance.
This is normal, and not considered a defect.
MP42PL Consists of:
[1] – Pilot Side Liner
Remove 4 Screws
to remove Burner
Assembly.
Pilot
Bend Retainer Clips away
from firebox wall. Bend back
to secure Porcelain Liner.
Glass Heat Deflectors
Baffle
Bend Retainer Clips away
from firebox wall. Bend back
to secure Porcelain Liner.
Pilot Side Liner
Pilot Side Liner
19
Summary of Contents for Marquis MCVP42LP
