Operation
1.Controls
1. Power indicator
2. Error indicator
3. Overheat indicator
4. Gun trigger indicator
5. Spot welding time display
6. Power percentage display
7 / 8. Spot welding time adjustment
9 / 10. Power percentage adjustment
1. Connect input power properly and safely.
2. Turn on the power switch and selection buttons according to required
working mode.
3. Appropriately adjust welding time and power according to actual situation.
4. After setting the parameters, the machine enters into standby mode and
is ready to weld.
5. When the temperature exceeds normal working temperature, the indicator
will light and overload protection will start. Wait few minutes until the light off,
then use the machine again.
6. The error indicator will light when the machine goes wrong, and the machine
enters into automatic protection mode. Cut off the power supply then check,
use the machine again until the problems are solved.
Instruction:
1
2
3
4
5
6
7
8
9
10
11
12
7
