Remark :
1. Setting amperage too high or time too long can cause workpiece surface damage.
2. Setting correct amperage and time according to the workpiece thickness.
3. Continuing another operation is applicable after these procedures finished.
If not, please shut the power off and switch off the unit.
Connect negative outside
wire to a clean paint free
location on metal workpiece
as close to welding area
as possible.
e. Wriggle Form Wire Welding
Connect wave form wire electrode
tip with welding gun.
Set correct time.
Connect hook puller with pull hammer
Hook wave form wire and slide
the hammer to pull out the dent.
Select welding function.
Place a wave form wire horizontally
on the dent Approximatelya 90°angle
to wave form wire Put on pressure
and press trigger.
(Position A is recommend)
Set correct power
13
