Page 6
In the receiver’s satellite set up menu screens, change the switch and dish type settings to:
DIRECTV SD
Switch Type: 02:Multiswitch Dish Type: 01: 18” Round
DIRECTV SD with Locals
Switch Type: 02:Multiswitch Dish Type: 02: 3-LNB (18 x 20”)
If your receiver does not offer one of these settings, call KING at (952) 922-6889 ext. 173 for
assistance.
After setting your receiver for either service as described above. . . . . . . . . . . go to page 10.
DISH subscribers with the following receivers:
ViP211z • ViP211k • ViP211 • 411
and who chose
Tailgater Mode
on the previous page . . . . . . . . . . . . . . . . . . go to page 14.
All other DISH and Bell TV subscribers:
After you have successfully configured your antenna, you must
configure your receiver for mobile use by running a check switch test . . . . . . . go to page 7.
5 RECEIVER CONFIGURATION: DIRECTV
6 RECEIVER CONFIGURATION: DISH AND BELL TV
For receiver compatibility, visit www.kingconnect.com/support/receivers/.
Dual tuner receivers or receivers with built-in recorders are not recommended and will not have full functionality when
used with the KING Quest antenna. Your local channels may not be available when traveling outside your home area.
Older receivers: choose round dish-1 satellite
Older receivers: choose oval dish-2 satellites
The KING Quest will not work with SWM only receivers.
For receiver compatibility, visit www.kingconnect.com/support/receivers/.
