Page 12
9 SECOND RECEIVER OPERATION: DISH AND BELL TV
INITIAL SETUP FOR SECOND RECEIVER
1. With the antenna locked on the satellite
and the second receiver connected to the
antenna unit’s AUX port coax, use your
DISH remote control and press
MENU
,
6
,
1
,
1
to
display the
Point Dish
screen.
2. Use the arrow buttons on the remote
to highlight “Check Switch.”
Press
SELECT
on your remote.
See the next page for downloading programming to the second receiver.
3. Verify “SuperDISH” and “Alternate”
are not selected.
Verify “Test” is highlighted.
Press
SELECT
on your remote.
4. When test is complete, highlight “Save.”
Press
SELECT
on your remote.
Antenna locked on
and
receiver connected!
Receiver sold separately.
