King-Dome 9704-LP, Installation And Operating Instructions Manual

Page: 7 / 40

Page 5
IMPORTANT! The tie strap and spacer, and the shipping bolts and washers must be removed from the bottom
of the dome unit prior to installation. DO NOT REMOVE THE DOME COVER TO REMOVE THESE
SHIPPING RESTRAINTS.
YOU MUST PLUG THE SHIPPING BOLT HOLES WITH THE SUPPLIED PLUGS (ATTACHED TO
TIE STRAP SHIPPING RESTRAINT).
2. Remove and discard the tie strap and spacer (KEEP RUBBER PLUGS AND GREASE
PACKET) , and the 2 bolts and 2 washers that pass through the bottom of the base (Fig. 5) .
3. Insert provided plugs into holes that were occupied by the shipping bolts. Inserted plugs
should be flush with base (Fig. 5) .
Fig. 5
IMPORTANT!
Remove and discard Tie
Strap and Plastic Spacer
prior to installation.
KEEP RUBBER PLUGS
AND GREASE PACKET.
IMPORTANT!
Remove and discard
Shipping Bolts and
Washers prior to
installation.
IMPORTANT!
After removing shipping bolts, firmly
insert plugs into holes. Plugs should
be flush with base.