Page 21
Bell TV HDTV 82/91 (satellites 82, 91)
1. On the King-Dome controller, press and release the
ON button. Wait for the status light to flash orange,
and then
WAIT 4 MORE SECONDS
.
2. Press and release the ON button
32
times.
The status light starts rapidly flashing green and red.
3. Press and hold the ON button for 4 seconds.
The status light will turn orange for 1 second,
and then start flashing green or red.
4. Press OFF.
5. After you have successfully configured the antenna, you must configure your
receiver for mobile use.
To configure your receiver,
GO TO PAGE 27 AND RUN THE CHECK SWITCH.
Bell TV HDTV 82/91 Alternate (satellites 82, 91)
STATIONARY USE ONLY
1. On the King-Dome controller, press and release the
ON button. Wait for the status light to flash orange,
and then
WAIT 4 MORE SECONDS
.
2. Press and release the ON button
36
times.
The status light starts rapidly flashing green and red.
3. Press and hold the button for 4 seconds.
The status light will turn orange for 1 second,
and then start flashing green or red.
4. Press OFF.
5. After you have successfully configured the antenna, you must configure your
receiver for mobile use.
To configure your receiver,
GO TO PAGE 27 AND RUN THE CHECK SWITCH.
Summary of Contents for 9704-LP
Page 2: ......
Page 24: ...This page intentionally left blank Page 22 ...
Page 28: ...This page intentionally left blank Page 26 ...
Page 39: ......
