King-Dome 9704-LP, Installation And Operating Instructions Manual

Page: 26 / 40

Page 24
Perform the programming on these two pages using the codes determined from the chart on
page 23
(EXCEPT DIRECTV 101 SERVICE) .
If you have DIRECTV 101 Service, set your receiver for round dish-1 satellite (do this through the
receiver’s satellite set-up menu screens), and then go to page 30, OPERATION).
SET SATELLITE SWITCHING MODE
1. Unplug the controller and plug in the Keypad.
2. Press ON.
3. Press
* 46 #
to display the current satellite switching mode
(see chart on page 23).
4. To change the satellite switching mode, press
* 96 #
* 66 #
* 88 #
5. Press the UP and DOWN arrows (2 and 8 keys) to choose your desired switching mode from
the chart on page 23.
6. Press
* 47 #
to lock in setting.
7. Turn unit OFF and back ON to save setting.
8. Press
* 46 #
to display and verify code for new satellite switching mode.
9. Continue with SET SATELLITE PROVIDER CODE on next page.