background image

GENERAL & SPECIFIC  

SAFETY INSTRUCTIONS

4) Power tool use and care

 

a) Do not force the power tool. Use the correct power tool for your application. The correct 
power tool will do the job better and safer at the rate for which it was designed. 
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that 
cannot be controlled with the switch is dangerous and must be repaired. 
c) Disconnect the charger plug from the power source and/or the battery pack from the 
power tool before making any adjustments, changing accessories, or storing power tools. 
Such preventive safety measures reduce the risk of starting the power tool accidentally. 
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar 
with the power tool or these instructions to operate the power tool. Power tools are     
dangerous in the hands of untrained users. 
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of 
parts and any other condition that may affect the power tool’s operation. If damaged, have 
the power tool repaired before use. Many accidents are caused by poorly maintained 
power tools. 
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting 
edges are less likely to bind and are easier to control. 
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, 
taking into account the working conditions and the work to be performed. Use of the power 
tool for operations different from those intended could result in a hazardous situation. 

 
5) Service

 

a) Have your power tool serviced by a qualified repair person using only identical    
replacement parts. This will ensure that the safety of the tool is maintained. 
 

CORDLESS LED WORK LIGHT SAFETY WARNINGS 
 
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING   
INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions 
listed below may result in electric shock, fire and/or serious personal injury. 
 
CAUTION: RISK OF ELECTRIC SHOCK, Do not use with extension while charging or 
charge near water or where water may accumulate. Keep work light at least 16 feet 
from pools and spas. 

 

 
PERSONAL INJURY 
• Do not look directly at the lighted lamps to avoid eye injuries. 
 
• Always keep the work light away from any flammable surface or materials. 
 
• Do not modify the work light in any way. Unauthorized modification may impair the     

function and/or safety and could affect the life of the product. There are specific    
applications for which the work light was designed. 

Summary of Contents for KC-1502LED-C








Reviews: