Package Contents
Warnings and Cautions
1of3
For Style DRS8409EK
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
A
Crossbar
Assembly
x 1
Please go to
for product cleaning tips. Go to the
selection.
(1) A19 Medium Base Bulb 100W Maximum, Medium Base Vintage Bulb is recommended, bulb not included.
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact your original place of purchase.
www.quoizel.com
Care + Maintenance
Light Source:
Estimated Assembly Time:
Preparation:
Fixture can only be mounted in the direction indicated on page 2.
Tools Required:
Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Installation Guide #IS-DRS8409EK
2019 QuoizelInc.
ReleasedDate:2019-03-15
visit us on-line at www.quoizel.com
B
Alternate
Mounting screw
x 2
Fixture Body
x 1
C
D
E
Tab
x 4
Glass Panel
x 4
STEP 2
Install Bulb
-
A. Insert the bulb onto the socket
and screw snugly into place.
Socket
Vintage Bulb
(recommended
but not included)
Figure 2
STEP 3
Install Glass Panels
-
A. Place the Glass Panel (D) into the slot
in the bottom edge of the cage. Secure
the Glass Panel (D) by pressing the
Tab (C) onto the top edge of the Glass
Panel (H) and the slot on the top edge
of the cage.
D
C
Slot
Slot
Figure 3
STEP 4
Install Cage and Arm to
Fixture Body
-
A. Place the cage over the bulb, attach
to the fixture hood on the Fixture
Body (E) and secure with previously
removed screws. Hand tighten until
snug with screwdrivers.
B. Place bolts on the bottom end of the
arm to holes on the bottom edge of
the cage and secure with previously
removed lock balls. Hand tighten
until snug.
Figure 4
Bolt
Hole
STEP 1
Remove Arm and Cage
-
A. Unlock lock balls in the bottom edge
of the cage and remove the arm from
the Fixture Body (E).
B. Unscrew screws on the top edge of
the cage and remove the cage from
the Fixture Body (E).
Arm
Screw
Cage
Lock Ball
E
Figure 1
Cage
Arm
E
Screw
Cage
Lock Ball
