DESCRIPTION
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Thermal
Protector
Integral Low Voltage
Transformers
Separate Wiring
Compartment
18” flexible conduit
3.88”
4.70”
10.24”
6.25”
5.75”
Required
above
ceiling
8.50”
10.24”
3.88”
1.60”
6.50”
3.39”
Perforated
Meshplate
45º x 45º
Adjust
Double
Gimbal
A ... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate
allows for trimless installation in drywall/
plaster ceilings by allowing the ceiling’s
mudding compound to be applied right
up to the edge of the fixture opening.
Includes a beveled “knife-edge” lips to
ensure a clean edge. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Integral electronic or magnetic low voltage
transformers. Transformers and electrical
are mounted in a separate metal enclosure
box attached to the junction box with 18”
of flexible conduit. Transformer enclosure
includes a separated wiring compartment
and two knockouts for conduit entry.
Transformer enclosure features perforated
metal door for easy maintenance access
and cooler operation. Entire electrical
assembly (jbox and transformer enclosure)
is removable from the housing for easy
maintenance.
E ... Lamps
One (1) 12V MR11 lamp mounted in
adjustable double gimbal. Lamp holder is
removable and may be regressed 1” for
additional cut-off. Lamp can accept up to
three optical accessories (i.e. lens + hex
snoot). 45º x 45º locking lamp
adjustment. Beveled-edge lamp ring is
secured with threadless, bayonet action.
Optional retractable arm is available for
lamp pulldown and extreme aiming.
F ... Mounting
Mounting clips are provided which
mount the housing edge flush with the
finished ceiling line. Mounting clips are
secured to the housing through the
meshplate with screws.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 5.00” x 5.00
COMBOLIGHT
®
Next Generation
Recessed
Single-Lamp Fixture
One (1) Light
12V MR11
Remodel Housing
Trimless
ORDERING INFORMATION
An adjustable Single-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes ONE (1) 12V MR11 lamp.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev 121107
Configuration
C1
=
COMBOLIGHT
Recessed One (1) Light
Housing
R
=
Remodel
C1
R
N
N
Lamp Type / Wattage Label
020M11
=
20 Watt max. MR11 12V
035M11
=
35 Watt max. MR11 12V
Power Supply
E
=
Electronic Low Voltage
Transformer
M
=
Magnetic Low Voltage
Transformer
Power Supply
Voltage
1
=
120V
2
=
277V
Lamp Mechanism
G
=
Double Gimbal
R
=
Retractable Double Gimbal
Trim Insert Finish
N
=
Trimless
Trim Insert
N
=
Trimless
Housing Interior/Electrical Door/Sleeve
Finish
W
=
White
B
=
Black
S
=
Industrial Silver
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
