kinetic KVDM-580IR(W), Manual

Page: 13 / 16

13
☞ ☞ ☞ ☞ PRIVACY Area Setting
• AREA SELECT : Select the programmed privacy
area (No.1~8)
• AREA DISPLAY : Turn on and off the programmed
privacy masking.
• LEFT/RIGHT : Move left-right (horizontal) position
of the programmed privacy area.
• WIDTH : Adjust horizontal width of the
programmed privacy area.
• TOP/BOTTOM : Move up-down (vertical) position of the programmed privacy area.
• HEIGHT : Adjust vertical height of the programmed privacy area.
• COLOR : Setup color of the programmed motion area mask.
6. SYNC
In areas where the supply is at 60Hz/NTSC (50Hz/P
AL), you can synchronize the output phase of
multiple cameras using the power synchronization
function (Line-Lock) without using a synchronization
signal generator.
▶ INT : Internal Synchronization Type
▶ L/L : Power Synchronization Type, Line-lock
• Press the SET button.
• You can select a desired phase between 0 and 359.
NOTE
• When using AC power at 60Hz / NTSC (50Hz/PAL)
frequency, you can use the L/L type synchronization.
• When the power is DC 12V, the SYNC. The menu is fixed to the ‘INT’ mode.
7. LANGUAGE
It can be switched to multi-language for OSD menu.
SYNC
▶ ▶ ▶ ▶
DPHASE
0 ~ 359
RETURN RET
↙
SPECIAL
1. CAM TITLE OFF
2. D-EFFECT
↙
3. RS485
↙
4. MOTION OFF
5. PRIVACY OFF
▶
6. SYNC INT
7. LANGUAGE ENGLISH
8. RETURN RET
↙
SPECIAL
1. CAM TITLE OFF
2. D-EFFECT
↙
3. RS485
↙
4. MOTION OFF
5. PRIVACY OFF
6. SYNC INT
7. LANGUAGE ENGLISH
8. RETURN RET
↙
↙ ↙
↙