kinetic KVDM-580IR(W), Manual

Page: 9 / 16

9
Note
• Under the following conditions the WHITE BALANCE function may not operate
properly. In such cases, please select the AWB mode.
When the object’s surroundings have a very high color temperature
(eg, a clear sky and sunset)
When the object’s surroundings are dark, If the camera directly faces a fluorescent light
or is installed in a place where there are considerable changes in illumination, the
WHITE BALANCE function may become unstable
.
4) DAY&NIGHT
You can display pictures in color or black and white
with IR LED ON/OFF
① ① ① ①
When the SETUP menu screen is displayed,
select ‘DAY / NIGHT’ by using the UP and
DOWN buttons so that the arrow indicates
“DAY NIGHT”.
②
② ②
②
Please select the mode you wish to operate by
pressing the LEFT or RIGHT button.
▶ ▶ ▶ ▶ COLOR : The pictures are always displayed in color. (IR LED Off)
▶
▶ ▶
▶ EXT : This mode allows you to apply a desired filter to external signals (CdS).
▶ ▶ ▶ ▶ B/W : The pictures are always displayed in
B/W (IR LED ON)
- “burst : If it cannot be synchronizing video
on the monitor in the BW mode of camera, it
turns on.
(When the camera in B/W mode, the WHITE
BALANCE is deactivated.)
If DAY NIGHT mode is AUTO, the AGC is fixed HIGH.
If the pictures are in color, the IR LEDs turn off and if the pictures are in B/W, the IR
LEDs are on.
5) 3DNR
This function reduces the background noise in a low luminance environment.
DAY NIGHT B/W
▶
▶ ▶
▶
BURST ON
RETURN RET
↙ ↙ ↙ ↙
→ → → →
3DNR
▶ ▶ ▶ ▶
LEVEL IIIIIIIIIIIIIIIIIIIII 50
RETURN RET
↙
↙ ↙
↙
SETUP
1. LENS DC
↙
2. EXPOSURE
↙
3. WHITE BAL ATW-L
▶
▶ ▶
▶
4. DAY NIGHT EXT
5. 3DNR ON
↙
6. SPECIAL
↙
7. ADJUST
↙
8. RESET
↙
9. EXIT
↙
SETUP
1. LENS DC
↙
2. EXPOSURE
↙
3. WHITE BAL ATW-L
4. DAY NIGHT EXT
▶ ▶ ▶ ▶
5. 3DNR ON
↙ ↙ ↙ ↙
6. SPECIAL
↙
7. ADJUST
↙
8. RESET
↙
9. EXIT
↙