Kimble Custom Chassis C6000, Safety Manual

Page: 23 / 106

Section 2 - Pre-Operation and Inspection
2-5 990001-014
3. Headlights & Turn Signals - Clean, undamaged and work properly.
4. Coolant System - See inspection note.
5. Engine -
• Drive belts, check condition and replace as required.
• Hoses, inspect for leaks and replace as required.
• See inspection note.
6. Air Cleaner - Air cleaner restriction indicator, check for clogged condition.
Replace element as required.
7. Wheel/Tire Assembly - Properly inflated and secured; no loose or missing lug
nuts. Inspect for worn tread, cuts, tears or other discrepancies.
8. Transmission - See inspection note.
9. Steps & Handles - Clean and unobstructed.
10. Battery - Cables tight, no visible damage or corrosion. Cover properly secured.
11. Fuel Tank - Inspect for leaks, structural damage, excessive corrosion or other
damage. Ensure fill cap is secured.
12. Wheel/Tire Assembly - Properly inflated and secured; no loose or missing lug
nuts. Inspect for worn tread, cuts, tears or other discrepancies.
13. Tail Lights & Turn Signals - Clean, undamaged and work properly.
14. Wheel/Tire Assembly - Properly inflated and secured; no loose or missing lug
nuts. Inspect for worn tread, cuts, tears or other discrepancies.
15. Fuel Tank - Inspect for leaks, structural damage, excessive corrosion or other
damage. Ensure fill cap is secured.
16. Steps & Handles - Clean and unobstructed.
17. Battery - Cables tight, no visible damage or corrosion. Cover properly secured.
18. Wheel/Tire Assembly - Properly inflated and secured; no loose or missing lug
nuts. Inspect for worn tread, cuts, tears or other discrepancies.
19. Cab & Electrical -
• General appearance; no visible damage.
• Window glass undamaged and clean.
• Gauges, switches, shifter, foot controls and horn operational.
• Check seat belt for damage, replace belt if frayed or cut webbing, damaged
buckles or loose mounting hardware.