Kimble Custom Chassis C6000 Safety Manual Download

Page: 57 / 106

Section 5 - Operation

5-3

990001-014

Battery Boosted Starting

If battery-boost starting (jump-start) is necessary, proceed as follows:

• Never allow vehicles to touch.

• Connect the positive (+) jumper cable to positive (+) post of discharged battery.

• Connect the opposite end of positive (+) jumper cable to positive (+) post of

booster battery.

• Connect the negative (-) jumper cable to negative (-) post on booster battery.

• Connect opposite end of negative (-) jumper cable to ground point on vehicle

away from discharged battery.

• Follow standard starting procedures.

• Remove cables in reverse order after vehicle has started.

WARNING

BATTERY EXPLOSION HAZARD.

Never jump start or charge a frozen battery

as it could explode. Keep sparks, flames and lighted smoking materials away
from the battery. Lead acid batteries generate explosive gases when charging.
Wear safety glasses. Failure to comply could result in death or serious injury.

OA0

Summary of Contents for C6000











































































































Search results

Summary of Contents for C6000

Reviews:

Related manuals for C6000

Brands by name

Popular brands

Kimble Custom Chassis C6000, Safety Manual

Search results

Summary of Contents for C6000

Reviews:

Related manuals for C6000

Brands by name

Popular brands