This manual
is f
or
use b
y qualified personnel
onl
y
65
JUNE 2022 / Rev: 1.0
c. Click “Devices” in the green, top, horizontal menu.
i.If it is not already selected, click “Device Overview” from the left hand menu.
The HAB shows up as “SECAN_BMS_0”
d.Click “Setup” in the green, top, horizontal menu.
i.Click “BMS Setup” in the left-hand vertical menu.
1.Select “KiloVault HAB 7.5” as the battery type.
2.Input the number of HABs in your battery bank.
3.Click “Apply”
e.Click “Devices” in the green, top, horizontal menu.
Click “Other Devices” in the left hand menu.
1.Click “SECAN_BMS_0”
2.Click “Configuration”
3.Click “BMS_DEV”
For information about operating the Conext XW Pro Inverter/Charger, see the Conext XW Pro Inverter/Charger Owner’s Guide (975-0240-01-01).