Kikusui PCZ1000A, Operation Manual, Page: 37 / 100

PCZ1000A
3-3
3
Ope
ration
R SET (RANGE)
The R SET key enables CR mode. The CR lamp above the key illuminates and
"RSET" appears on the display. RSET key enables the resistance limit value to be
changed with the rotary knob.
To select the range function, press the SHIFT key and then, after the SHIFT LED
above the SHIFT key illuminates, press the R SET (RANGE) key. The range
switches between "H" and "L" each time the R SET (RANGE) key is pressed.
P SET
The P SET key enables CP mode. Both the CC and CR LEDs illuminate and
"PSET" appears on the display. This key enables the power limit value setting
(PSET) to be changed with the rotary knob.
C.F key
The C.F. key enables the crest factor function. Press the SHIFT key and then, after
the SHIFT LED above the key illuminates, press the C.F. key. The LED above this
key illuminates, and "CREST FACTOR" appears on the display. This key enables
the crest factor to be changed with the rotary knob.
Preset Memory Key
MEM (DMEM)
To save the active setting and range in the selected memory location, select memory
save mode and then press the A, B, or C key. To select the memory modify function
(DMEM), press the SHIFT key and then, after the LED above the key illuminates,
press the MEM (DMEM) key. The memory modify function changes the setting
stored in memory A, B, or C only and does not change the present active setting.
page 3-34
To reset each setting to its default value, turn on the POWER switch with the MEM
key held down.
A, B or C
Calls up and displays a setting stored in memory A, B or C. In the memory save
mode, these keys select memory A, B or C.
See