Kikusui DME1600, Manual

Page: 33 / 56

DME1600
33
System Commands
Messa
ge Ref
e
re
nce
2
L0
Sets the DME1600’s language to DEFAULT (the factory default setting).
Command
L0
L1
Sets the DME1600’s language to COMPATIBLE (Agilent A34401 compatible).
Command
L1
SYSTEM:IDNSTR
Changes the character string that is used to identify the DME1600 from remote applications
(the character string can contain up to 39 characters). You can put information such as the
maker and product names into the character string.
Command
SYSTEM:IDNSTR <quoted string>
DATA:POIN
Queries the number of measured values stored in the DME1600’s internal memory.
Command
DATA:POINts?
*RST
Resets the DME1600 to its power-on settings. This command clears the error queue.
Command
*RST
*IDN
Retrieves the character string (of 35 characters or more in length) used to identify the
DME1600.
Command
*IDN?
SYST:LOC
Switches to local mode. All the keys on the front panel can be used.
Command
SYSTem:LOCal
SYST:REM
Switches to remote mode. None of the keys on the front panel can be used except for the
LOCAL key.
Command
SYSTem:REMote