E140G Components
Stabilizer Legs
- Secures the machine in a sta onary posi on for tube pull out and retrac on
Shutoff Bar
- Controls the motor shut off at the end of an irriga on run or in case of tube mis-wrap
Speed Control
- Controls the retrac on speed
Pressure Gauge
- Displays inlet pressure
Drain
- Used to relieve pressure from the supply hose and to winterize
Holdout Handle
- Used to disengage the hold pawl for the tube pull out
Motor
- Electric 12V Motor
Motor Engage/Disengage
- Engages the pinion gear into place to drive, and away from drive ring gear for pull out
Supply Inlet
- Used to a ach the supply hose to the machine
NOTE: The E140G is designed to run on a 12V DC source. Although not necessary; it is recommended to use a deep cycle
ba ery. Deep cycle ba eries provide a steady amount of current over a long period of me. The factory wire connec on for
the ba ery is set up to use a “marine post adaptor” set.
Stabilizer Legs
Shutoff Bar
Speed Control
Pressure Gauge
Drain
(under inlet)
Holdout Handle
Motor
Motor Engage/Disengage
Supply Inlet
