E140G Electric Drive Opera on
With the water supply off; disengage the Holdout Handle
by (pulling up & over) dropping the Holdout Handle fully down
. Pull up on the
Motor Mount Pin and engage the Motor Drive Pinion into the Ring Gear. Drop Motor Mount Pin into locking posi on
Note: in most instances it will be necessary to turn the motor on (briefly) in order for the Drive Pinion to mesh with the Ring Gear.
Turn on the water supply. Confirm the sprinkler is opera ng as expected and in the desired arc. Wait for all of the air to be purged
from the system and for the sprinkler to operate smoothly. Set the Speed Control Knob to the desired retrac on speed.
Holdout Handle
Motor Mount Pin
Engage Motor drive
OFF
SLOW
FAST
Speed Control Knob
