Re- me the Level Wind con nued:
3.
T
o change the ming, remove the Shield and disconnect the Level Wind Drive Chain from the right hand side of the
Water-Reel. Rotate the Level Wind Input Sprocket un l the Tube Follower is posi oned as described in step #2.
Reinstall the Level Wind Drive Chain and Shield. The Level wind will now be in proper ming.
Adjustments
Turn Level Wind Input
Sprocket to posi on
Tube Follower
Holdout Handle adjustment
When the Holdout Handle is pulled up during tube pull out; the Pawls (two on the B140G and one on the E140G) must not
contact the Ring Gear at any me. Adjustments can be made by the Set Collars posi on un l required clearance.
Holdout Handle
Set Collar
Hold Pawl
Drive Pawl
(B140G only)
Ring Gear
