Adjustments
Adjus ng Level Wind Chain
The Level Wind chain tension is adjusted
under the Level Wind Chain Guard. To adjust,
loosen the bolt on the Chain Idler and move
either up or down.
NOTE: DO NOT
a empt to
adjust the Level Wind chain
tension with the Spool Bearing
Bolt.
Adjus ng Motor Pinion-Ring Gear Distance
With the Motor Mount Pin engaged, the Drive Pinion to Ring Gear clearance should be 1/16” to 3/32” (.063” - .094”). Adjust the
Drive Pinion clearance by loosening the two Motor Mount Bracket bolts on the side of the frame and sliding the Motor Mount
Bracket in towards or away from the Ring Gear. Once the correct clearance distance is acquired, re- ghten the two bolts.
DO NOT adjust this
bolt for chain tension
Chain Idler
(2) Motor Mount Bracket bolts
Adjust by sliding Motor Mount Bracket
towards or away from Ring Gear
Drive Pinion
1/16” - 3/32”
Ring Gear
