Water-Reel Start-Up & Opera on
Ensure that the Holdout Handle is disengaged (lower posi on) for transport. Pull the Water-Reel into posi on with the Gun Cart
towards the run to be irrigated. Be especially careful to have the machine square and in good alignment with the irriga on path.
Lower the Stabilizer Legs and confirm they have made good ground contact. Never a empt to operate the Water-Reel without
both legs inserted into the ground.
A ach the water supply line to the machine to confirm that all lines reach and the Water-Reel is set in the proper place.
Do not turn on the water.
B140G (bellows drive) Only
- Un-stow and a ach the Bellows Exhaust Drain Hose to the Bellows
Exhaust Discharge. Confirm that the Drain Hose is not kinked or blocked.
E140G Electric Motor Drive Machines Only
-
MUST
have the Drive Pinion on the Motor
disengaged
prior to pull out. To disengage: pull the Motor Mount Pin and slide the Motor away from the Ring Gear.
Disengage the Pawl(s) by pulling up on the Holdout Handle into the back posi on (move up and to the le ). If the Pawls do not
disengage the gear easily; rotate the Spool forward (counterclockwise) to relieve tension on the Drive Pinion or Drive Pawl.
Both Pawls (two on Bellows Drive & one on Electric Motor Drive) must clear the Ring Gear on the Spool.
A ach Bellows
Exhaust Drain Hose
A ach water supply
Lower both (sides)
Stabilizer Legs
Pull up on Holdout Handle
and lock into place by moving
it to the le
B140G Model
E140G Model
A ach water supply
Pull up on Holdout Handle
and lock into place by moving
it to the le
Pull up on Motor Mount Pin
and slide Motor away from
Ring Gear
If the Pawls are under tension; grab the
spool side and relieve pressure by rota ng
slightly counter-clockwise. This will relive the
pressure and ease the ability to li the
Holdout Handle
