Kielder KWT-011 Original Instruction Manual Download Page 7

7

  

Kielder WT Ltd   

KWT-011-IMA21

Collection And Disposal Of Old 

Equipment And Used Batteries:

These symbols on the products, packaging 

and accompanying documents mean that 

used electronic products and batteries 

should not be mixed with general household 

waste.

•  When  the  battery  pack  is  not  being 

used, the battery should be stored so that 

foreign substances like dust and water do 

not contaminate the terminals.
•  When  the  battery  pack  is  being 

charged, ensure that the terminals are 

free of dust and water. Clean the terminals 

before using the battery if any foreign 

substances are seen. 
•  The  life  of  the  battery  pack  may  be 

adversely affected by dust or water during 

operation.
•  If the motor or battery becomes hot, the 

protection function will activate and the 

motor or battery will stop operating.
•  Before  inserting  the  battery  pack, 

always check to ensure that the tool is 

turned off.
•  For  safe  use  ensure  that  the  battery 

pack is installed properly and securely to 

the main unit before operating.
•  Do  not  use  other  than  the  Kielder 

battery packs that are designed for use 

with this rechargeable tool.
•  Kielder  is  not  responsible  for  any 

damage or accident caused by the use of 

recycled or counterfeit battery packs.

• Do not dispose of the battery 

pack  in  a  fire  or  expose  it  to 

excessive heat.

•  Do  not  attempt  to  dismantle  or  modify 

the battery pack.
•  Do  not  subject  the  battery  pack  to 

shocks or drive nails or similar items into it.
•  Do not allow metal objects to touch the 

terminals on the battery pack.
•  Do not carry or store the battery pack in 

the same container as nails or small metal 

objects.

CAUTION!

This product is powered 

by a rechargeable battery 

system, please pay 

attention to these additional instructions:

•  Do  not  charge  the  battery 

pack in a high temperature 

location e.g. next to a fire or in 

direct sunlight. The battery may 

overheat, catch fire or explode.
•  Do  not  use  other  than  the  dedicated 

charger to charge the battery pack as the 

battery may leak, overheat or explode.
•  When  removing  the  battery  pack  from 

the tool or the charger, always reattach the 

pack cover as the battery contacts could be 

shorted, leading to a risk of fire.
•  When the battery pack has deteriorated 

replace it with a new one. Continued use of 

a damaged battery pack may result in heat 

generation, ignition or rupture of the battery.

MAX 45ºC

Li-Ion

For proper treatment, recovery and recycling 

of old products and used batteries, please 

take them to applicable collection points, in 

accordance with the national legislation and 

the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and 

batteries correctly, you will help to save 

valuable resources and prevent any potential 

negative  effects  on  human  health  and  the 

environment which could otherwise arise 

from inappropriate waste handling.
For more information about collection and 

recycling of old products and batteries, 

please contact your local municipality, your 

waste disposal service or the point of sale 

where you purchased the items.
Penalties may apply for the incorrect 

disposal of waste in accordance with 

national legislation.

Summary of Contents for KWT-011





















Reviews: