Kielder KWT-011 Original Instruction Manual Download Page 14

14

KWT-011-IMA21 

 

Kielder WT Ltd

Battery Care

•  If the tool is started with little battery power 

remaining, it may stop operating after a short 

time. If this happens charge the battery pack 

accordingly.
•  Excessive  discharging  of  lithium-ion 

batteries dramatically shortens their life. This 

tool includes a battery protection feature to 

prevent excessive discharging of the battery 

pack. If the tool is subject to a sudden load 

during use that causes the motor to lock, the 

over-discharge prevention sensor may trigger. 

If this happens, address the issue that caused 

the motor to lock and cycle the trigger.
•  For optimum battery life, store the battery 

pack following use without charging it.
•  Do not charge the battery pack when the 

temperature is below 0°C or above 40°C.
•  When  charging  the  battery  pack  ensure 

that the terminals on the battery charger 

are free of foreign objects such as dust and 

water. If any dirt is found on the terminals 

clean the terminals before charging the 

battery pack. The life of the battery pack 

terminals  may  also  be  affected  by  foreign 

objects during operation.
•  Avoid  storing  the  battery  pack  in  a 

container with other metal objects such as 

nails, coins, etc. Metal objects can make a 

connection from one terminal to another and 

could short the battery terminals resulting in 

overheating and irreparable damage to the 

battery, sparks, burns or fire.
•  Do  not  touch  the  terminals  with  any 

conductive material.
•  When operating the battery pack, ensure 

that the work place is well ventilated.
•  When the battery pack is removed from 

the main unit, store the battery in a location 

to prevent dust or dirt from contaminating 

the battery terminals which may cause a 

short circuit.

•  Do not store the battery pack in locations 

where the temperature may reach or exceed 

45°C
•  Do not incinerate the battery pack even if 

it is severely damaged or is completely worn 

out. The battery pack can explode in a fire.
•  Do not expose the battery pack to water 

or rain.
•  Be careful not to drop, shake or strike the 

battery.

Battery Pack Life

The rechargeable batteries have a limited 

life. If the operation time becomes short 

after recharging, replace the battery pack.

ATTENTION!

Battery Recycling 

For environmental protection and recycling 

of materials, please ensure that the battery 

pack is disposed of at an officially assigned 

location

Note:

The battery pack is not fully charged at the 

time of purchase. Be sure to charge the 

battery before use.

Summary of Contents for KWT-011





















Reviews: