Kielder KWT-011, Original Instruction Manual, Page: 3 / 20

3
Kielder WT Ltd KWT-011-IMA21
Noise & Vibration Data
Acoustic Pressure: <81(A) K=3dB
Acoustic Power: <92dB(A) K=3dB
Maximum Vibration: <2.371m/s2 / K = 1.5m/s2
Sound emission values determined according
to EN60745-2-1. The declared vibration total
value has been measured in accordance with
a standard test method used to compare
one tool with another and according to
EN60745. Both sound and vibration values
have an uncertainty factor of K. The declared
total values may be used in a preliminary
assessment of exposure.
WARNING!
The vibration emission during
actual use of the power tool can
differ from the declared total
value depending on the ways in which the tool
is used. The need to identify safety measures
and to protect the operator are based on an
estimation of exposure in the actual conditions
of use (taking account of all parts of the
operating cycle, such as the times the tool is
switched off, when it is running idle, in addition
to trigger time). Identify additional safety
measures to protect the operator such as
proper maintenance of the tool, keeping hands
warm and organisation of work patterns.
EC - Declaration Of
Conformity
We declare that under our responsibility the
product under part number:
KWT-011 18V Cordless Drill Driver complies
with the applicable EU directives:
2011/65/EU, 2004/108/EC, 2006/42/EC
including the amendments and are manufactured
in accordance following standards or
standardised documents:
EN 60745-1:2009+A11
EN 60745-2-1:2010
EN 60745-2-2:2010
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008
All documentation is held in KWT-011 Technical
File and is available, on request for review.
Authorised Signatory:
Steven Bulloss
Director
Dated: 01/01/2020
Kielder WT Ltd, Unit 14 Carlisle Business Park,
40 Chambers Lane, Sheffield S4 8DA
IMPORTANT!
Please read these operating and
safety instructions carefully and
completely. For your own safety, before using
this equipment check that the voltage is
correct and that all external parts are firmly
secured and the machine in tact. If you are
uncertain about any aspect of using this
equipment, or require support please contact
Kielder WT customer services and we’ll be
happy to help:
Tel: 0114 242 3794
Email: tools@kielder.co
Contents
Safety Rules & Instruction 4
Product Overview Diagram 8
Specification Table 9
Usage
Drill Driver 10
Battery 13
Charger 14
Maintenance, LED Light & Belt Clip 16
Warranty & Support 17
Plug Type
• The appliance is supplied with a moulded
three pin mains plug for your safety and
convenience.
• Only use this plug in the socket it is
intended.
• A 3 amp fuse is fitted in this plug. Should
the fuse need to be replaced please ensure
that the replacement fuse has a 3 amp
rating and it is approved by ASTA or BSI to
BS1362.
• Check for the ASTA mark or the BSI mark
on the fuse.
• If the plug contains a removable fuse
cover, you must ensure that it is refitted when
the fuse is replaced.
• If you lose the fuse cover the plug must
not be used until a replacement cover is
obtained.
Intended Use
This tool can be used to tighten screws in
screw mode, drill holes in wood & metal in
drill mode.