Kielder KWT-011, Original Instruction Manual, Page: 11 / 20

11
Kielder WT Ltd KWT-011-IMA21
Forward Rotation (Clockwise)
• Push the lever into the forward rotation
position (G).
• Depress the trigger (H) slowly to start
the tool, check the direction of rotation is as
required.
• The speed increases as the trigger is
depressed further.
• The brake operates and tool stops
immediately when the trigger is released.
Reverse Rotation (Anti-Clockwise)
• Push the lever into the reverse rotation
position (J).
• Depress the trigger (H) slowly to start the
tool, checking the direction of rotation
• The speed increases as the trigger is
depressed further.
• The brake operates and the socket stops
immediately when the trigger is released.
Operating the Tool
WARNING!
Do not operate the Forward/
Reverse lever unless the tool is
at a complete stop.
(G)
(J)
(I)
(H)
(H)
• After use, move the lever to the centre (I),
this is the trigger lock position and how the
tool should be stored.
• After use, move the lever to the centre (I),
this is the trigger lock position and how the
tool should be stored.
CAUTION!
Don’t operate the tool
continuously when switching
battery packs. The tool requires time to
cool down in between. In normal operating
ambient temperatures this should take around
5 minutes, in hot working conditions allow a
longer time for the tool to cool down.
DO NOT close up any of the vent holes on the
sides of the main unit during operation. The
machine function may be adversely affected.
DO NOT strain the motor as this may cause
damage to the unit. When drilling allow the bit
to do the work.
Ensure that the tool is used in such a way as
to prevent the hot air from the vent holes being
blown onto your skin as this may cause burns.