manualshive.com logo in svg

KIC start, User Manual

Share
Download
KIC start User Manual Download Page 42

KICstart  

Version 

1.1.0.x 

KICstart User Manual 

 

35 

Live Profile Graph Display 

The live profile graph display is displayed only when using the 

KICstart

 with trailing wires or elongated 

thermocouples.  The live profile graph display will show the profile plot on the graph for the current profile 
that is running.  You will only see the 

Live Profile Graph Display

 when the 

KICstart

 profiler remains 

connected while profiling. 
 

 

 
While the 

KICstart

 is in the oven, and until the profile has ended, the software will continue to display the 

live profile graph.  The other tab at the top of the screen;

 Description

 is inaccessible. 

 

•

 

The current oven temperature setpoints and conveyor speed for this profile is displayed beneath 
the 

Statistics table

. 

•

 

The profile status is displayed at the bottom of the screen. 

 
 
The Live profile graph display will remain on your screen until the 

KICstart

 has achieved the trigger 

temperature that determines the profile end, and the KICstart communication cable is connected. 
 
 
 

Oven temperature settings 
and conveyor speed. 

Profile status 

Summary of Contents for start


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands