manualshive.com logo in svg

KIC start, User Manual

Share
Download
KIC start User Manual Download Page 11

Version 1.1.0.x 

 

KICstart 

4 

 

KICstart User Manual 

KICstart Technology 

The

 KICstart 

uses different technology to complete its task of running profiles.  The main difference 

between it and other profilers is the following: 
 

♦

 

Air thermocouple 

– For all profiles run with the KICstart software the thermocouple plugged 

into the first channel on the KICstart must be the Air TC.  This TC is positioned 1 inch in front of 
the leading edge of the board for all profiles run using KICstart software. 

♦

 

Trigger temperatures

 – The KICstart uses trigger temperatures to start and stop the profile.  The 

Start temperature is defaulted to 2 degrees above the Maximum Product Start temperature. See 
Global Preferences for this value. 

♦

 

Hardware Monitor

 - The combination of the KICstart and the KICstart software closely monitors 

the KICstart battery, internal temperature and the product temperature even before you start a 
profile.  There are built-in checks in the software to insure that the product and KICstart are cool 
enough and battery voltage sufficient to complete a profile safely.  As well it will offer 
troubleshooting suggestions if there is a problem with communication or thermocouple 
attachment. 

♦

 

Perfect Data

 – Through patent pending technology the KICstart is able to get you perfect data 

every time.  At the completion of a profile the KICstart retransmits the data it has stored in its 
memory, once the communication cable is connected. 

 
 
 

Summary of Contents for start


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands