manualshive.com logo in svg

KIC start, User Manual

Share
Download
KIC start User Manual Download Page 40

KICstart  

Version 

1.1.0.x 

KICstart User Manual 

 

33 

Once you have selected your thermocouples, you are ready to profile. 
 
Make sure the 

KICstart

 profiler hardware is properly connected to the computer.  You will be able to view 

the live readings for each selected thermocouple.  If you don’t see the live readings, the 

KICstart

 hardware 

is not connected properly.    Recheck the cable connections, and make sure a fresh battery is installed. 
 
Select the 

Start Profile

 (Green traffic light) button to begin profiling. 

 
The 

KICstart

 software requires that the selected thermocouples read valid temperatures below the 

Maximum product temperature at start of profile

 as displayed in the 

Global Preferences

 screen.  The 

default setting is 40ºC/104ºF. 
 

If any of the selected thermocouples read too high, this message will appear: 

 

 
 
When the 

KICstart

 software detects valid temperatures for all of the selected thermocouples, it will allow 

you to start the profile. 
 

In certain situations the KICstart software may display other messages with directions in addition to 
what is outlined below.  Read these messages and follow these directions carefully. 

 
Next, the 

KICstart 

software will ask you to 

verify the oven is stable. 
 

•

 

Yes –

 The software will prompt you 

to put the

 KICstart

 and the board in 

to the oven. 

•

 

No –

 The software will return you to 

the main screen to start again. 

 
 

•

 

The software will ask you to change the oven 
setpoint temperatures to the temperatures that 
the control thermocouples are currently 
reading and then start the profile again, press 
OK. 

 
 
 
 
 

Summary of Contents for start


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands