manualshive.com logo in svg

Kia 2009 Rio Series, Owner'S Manual

The Kia 2009 Rio Series Owner's Manual is a comprehensive guide that enables Kia owners to understand and operate their vehicles effectively. Easily accessible for free download, this user-friendly manual equips owners with essential knowledge on maintenance, troubleshooting, and maximizing their Kia driving experience. Enhance your driving experience today at manualshive.com.

Share
Download
background image

Knowing your vehicle

40

3

Child restraint system 

For small children and babies, the use of
a child seat or infant seat is strongly rec-
ommended and is required by law in
almost all states. This child seat or infant
seat should be of appropriate size for the
child and should be installed in accor-
dance with the manufacturer's instruc-
tions.
Children riding in the car should sit on
the rear seat and must always be proper-
ly restrained to minimize the risk of injury
in an accident, sudden stop or sudden
maneuver. According to accident statis-
tics, children are safer when properly
restrained in the rear seats than in the
front seat.
Child restraint systems are designed to
be secured in vehicle seats by lap belts
or the lap belt portion of a lap/shoulder
belt, or by a LATCH system (if equipped).
Children could be injured or killed in a
crash if their restraints are not properly
secured. For small children and babies, a
child seat or infant seat must be used.
Before buying a particular child restraint
system, make sure it fits your car and
seat belts, and fits your child. Follow all
the instructions provided by the child
seat manufacturer when installing the
child restraint system.

1JBH3051

WARNING

- 

Child
restraints

• A child restraint system must be

placed in the rear seat. Never
install a child or infant seat on the
front passenger’s seat.
Should an accident occur and
cause the passenger air bag to
deploy, it could severely injure or
kill an infant or child seated in the
front seat.

(Continued)

(Continued)
• Since a safety belt or child

restraint system can become very
hot if it is in a closed vehicle, be
sure to check the seat cover and
buckles before placing a child
there.

• When the child restraint system

is not in use, store it in the trunk
or fasten it with a safety belt so
that it will not be thrown forward
in the case of a sudden stop or an
accident.

• Children who are too large to be

in a child restraint should sit in
the rear seat and be restrained
with the available lap/shoulder
belts.

• When using the vehicles

lap/shoulder safety belts, always
make sure that the shoulder belt
portion is positioned midway over
the shoulder, never across the
neck or behind the back. The lap
belt portion of the lap/shoulder
belt must always be positioned as
low as possible on the child's hips
and as snug as possible.

(Continued)

Summary of Contents for 2009 Rio Series




























































































































































































































Reviews:

No comments

Related manuals for 2009 Rio Series

Daihatsu F300 Service Manual preview
F300
Brand: Daihatsu Pages: 1718
Camcar 40000 Manual preview
40000
Brand: Camcar Pages: 6
CAMPARK R10 Manual preview
R10
Brand: CAMPARK Pages: 20
EAL Formula 523585 Assembly Instructions preview
Formula 523585
Brand: EAL Pages: 4
Eaton Green Motion Building Quick Start Manual preview
Green Motion Building
Brand: Eaton Pages: 12
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
Yakima SideWinder Installation Instructions And Owner'S Manual preview
SideWinder
Brand: Yakima Pages: 8
Camcar 40108 Mounting Instructions preview
40108
Brand: Camcar Pages: 6
ABL eMH3 Quick Start Manual preview
eMH3
Brand: ABL Pages: 4
Ford Focus ST 2018 Supplement Manual preview
Focus ST 2018
Brand: Ford Pages: 38
B-Speech Pago INBTHF020 User Manual preview
Pago INBTHF020
Brand: B-Speech Pages: 24
Cadillac 2007 CTS Owner'S Manual preview
2007 CTS
Brand: Cadillac Pages: 518
Opel OPEL INSIGNIA Infotainment Manual preview
OPEL INSIGNIA
Brand: Opel Pages: 141
Cadillac 1997 Catera Owner Assistance Information preview
1997 Catera
Brand: Cadillac Pages: 34
SAAS StreetLine Series Installation Instructions preview
StreetLine Series
Brand: SAAS Pages: 4
Caltrend BM110 Installation Instructions preview
BM110
Brand: Caltrend Pages: 2
Advanced ICE 1296-1 Manual preview
1296-1
Brand: Advanced ICE Pages: 4

Brands by name

Popular brands

Load more brands