manualshive.com logo in svg

Kia 2009 Rio Series, Owner'S Manual

The Kia 2009 Rio Series Owner's Manual is a comprehensive guide that enables Kia owners to understand and operate their vehicles effectively. Easily accessible for free download, this user-friendly manual equips owners with essential knowledge on maintenance, troubleshooting, and maximizing their Kia driving experience. Enhance your driving experience today at manualshive.com.

Share
Download
background image

7 27

Maintenance

Wheel replacement 

When replacing the metal wheels for
any reason, make sure the new
wheels are equivalent to the original
factory units in diameter, rim width
and offset.

(Continued)
• Your vehicle is equipped with

tires designed to provide for
safe ride and handling capa-
bility. Do not use a size and
type of tire and wheel that is
different from the one that is
originally installed on your
vehicle. It can affect the safety
and performance of your vehi-
cle, which could lead to han-
dling failure or rollover and
serious injury. When replacing
the tires, be sure to equip all
four tires with the tire and
wheel of the same size, type,
tread, brand and load-carrying
capacity.
If you nevertheless decide to
equip your vehicle with any
tire/wheel combination not
recommended by Kia for off
road driving, you should not
use these tires for highway
driving.

(Continued)

(Continued)
• The use of any other tire size

or type may seriously affect
ride, handling, ground clear-
ance, stopping distance, body
to tire clearance, snow tire
clearance, and speedometer
reliability.

• It is best to replace all four

tires at the same time. If that is
not possible, or necessary,
then replace the two front or
two rear tires as a pair.
Replacing just one tire can
seriously affect your vehicle’s
handling.

• The ABS works by comparing

the speed of the wheels. Tire
size can affect wheel speed.
When replacing tires, all 4 tires
must use the same size origi-
nally supplied with the vehicle.
Using tires of a different size
can cause the ABS (Antilock
Brake System) and ESC
(Electronic Stability Control) (If
equipped) to work irregularly.

WARNING

A wheel that is not the correct
size may adversely affect wheel
and bearing life, braking and
stopping abilities,

handling

characteristics, ground clear-
ance, body-to-tire clearance,
snow chain clearance,
speedometer calibration, head-
light aim and bumper height.

Summary of Contents for 2009 Rio Series




























































































































































































































Reviews:

No comments

Related manuals for 2009 Rio Series

EAL Formula 523585 Assembly Instructions preview
Formula 523585
Brand: EAL Pages: 4
Xblitz G250 User Manual preview
G250
Brand: Xblitz Pages: 16
Subaru 2005 Baja Owner'S Manual preview
2005 Baja
Brand: Subaru Pages: 34
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
Pontiac 2004 Vibe Navigation System Owner'S Manual preview
2004 Vibe Navigation System
Brand: Pontiac Pages: 44
Dodge 8W-30 Wiring Diagram preview
8W-30
Brand: Dodge Pages: 24
Van Guard VG273 Fitting Instructions preview
VG273
Brand: Van Guard Pages: 3
Dodge Dodge Challenger SRT8®Challenger SRT8 392 2012 Specifications preview
Dodge Challenger SRT8®Challenger SRT8 392 2012
Brand: Dodge Pages: 5
Edelbrock 65932 Installation Instructions preview
65932
Brand: Edelbrock Pages: 2
Hudson 1933 Eight Owner'S Manual preview
1933 Eight
Brand: Hudson Pages: 34
Alfa Romeo Giulietta 2.0 JTDM Manual preview
Giulietta 2.0 JTDM
Brand: Alfa Romeo Pages: 14
Kuda 293950 Installation Instruction preview
293950
Brand: Kuda Pages: 3
HAKR HV1160 Quick Start Manual preview
HV1160
Brand: HAKR Pages: 2
Edelbrock 71883 Installation Instructions preview
71883
Brand: Edelbrock Pages: 4
Kuda-Phonebase 291790 Installation Instruction preview
291790
Brand: Kuda-Phonebase Pages: 3
caron PHC-9000 User Manual preview
PHC-9000
Brand: caron Pages: 10
Volkswagen Passat 1995 Official Factory Repair Manual preview
Passat 1995
Brand: Volkswagen Pages: 307
Mitsubishi 1989 Galant Service Manual preview
1989 Galant
Brand: Mitsubishi Pages: 1273

Brands by name

Popular brands

Load more brands