manualshive.com logo in svg

Kia 2009 Rio Series, Owner'S Manual

The Kia 2009 Rio Series Owner's Manual is a comprehensive guide that enables Kia owners to understand and operate their vehicles effectively. Easily accessible for free download, this user-friendly manual equips owners with essential knowledge on maintenance, troubleshooting, and maximizing their Kia driving experience. Enhance your driving experience today at manualshive.com.

Share
Download
background image

3 75

Knowing your vehicle

Sunvisor

Use the sunvisor to shield direct light
through the front or side windows.
To use a sunvisor, pull it downward.
To use a sunvisor for a side window
shade, pull it downward, unsnap it from
the bracket (1) and swing it to the side.

✽

✽

NOTICE

Return the sunvisor to its original posi-

tion after use. 

Power socket  

The power outlets are designed to pro-
vide power for mobile telephones or
other devices designed to operate with
vehicle electrical systems. The devices
should draw less than 10 amps with the
engine running.

✽

✽

NOTICE

• Use the power outlet when the engine

is running, and remove a plug from

the power outlet after using the elec-

tric appliance. Using the power outlet

excessively or while the engine is not

running or leaving appliances plugged

into the power outlet when not in use

will cause battery discharge

• Only use the electric appliances which

are less than 12V and 10A in electric

capacity.

• Adjust the air-conditioner or heater to

the lowest operation level when you

have to use the power socket while

using air-conditioner or heater.

• Close the cover when not in use.

• Some electronic devices can cause

electronic interference when plugged

into a vehicle’s power outlet. These

devices may cause excessive audio

static and malfunctions in other elec-

tronic systems or devices used in your

vehicle.

OJB028101

1JBA3102

Summary of Contents for 2009 Rio Series




























































































































































































































Reviews:

No comments

Related manuals for 2009 Rio Series

Lancia THESIS CONNECT Owner'S Handbook Manual preview
THESIS CONNECT
Brand: Lancia Pages: 386
Kia Picanto 2015 Quick Reference Manual preview
Picanto 2015
Brand: Kia Pages: 10
FAAFTECH FT-VF-HND2 Installation Manual preview
FT-VF-HND2
Brand: FAAFTECH Pages: 8
AutoMaxi AXIS XXL Instructions preview
AXIS XXL
Brand: AutoMaxi Pages: 2
Waeco MagicWatch MWE250 Installation And Operating Manual preview
MagicWatch MWE250
Brand: Waeco Pages: 172
XTC ATS-POL-GBU Manual preview
ATS-POL-GBU
Brand: XTC Pages: 4
RAM 2012 Truck Chassis cab Owner'S Manual preview
2012 Truck Chassis cab
Brand: RAM Pages: 506
Toyota CAMRY HV Manual preview
CAMRY HV
Brand: Toyota Pages: 636
Paccar DAF CHARGEMAX 90 User Manual preview
DAF CHARGEMAX 90
Brand: Paccar Pages: 40
ZAPTEC ZapCharger Portable C1 User Manual preview
ZapCharger Portable C1
Brand: ZAPTEC Pages: 20
Broadfeet RSLX-385-68S Installation Instructions preview
RSLX-385-68S
Brand: Broadfeet Pages: 2
Kuda 076100 Installation Instruction preview
076100
Brand: Kuda Pages: 3
Quadratec QuadraTop Adventure Top S Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 13
ULTIMATE SPEED ULG 12 B3 Operation And Safety Notes preview
ULG 12 B3
Brand: ULTIMATE SPEED Pages: 56
TOP VEHICLE TECH GRKRT01 Installation Manual preview
GRKRT01
Brand: TOP VEHICLE TECH Pages: 8
CAME UNIPARK ARK1 Manual preview
UNIPARK ARK1
Brand: CAME Pages: 14
CaRobotor Y Pro Instruction Manual preview
Y Pro
Brand: CaRobotor Pages: 9
U.S. General 6"OFF ROAD LIGHT 95811 Assembly And Operation Instructions Manual preview
6"OFF ROAD LIGHT 95811
Brand: U.S. General Pages: 7

Brands by name

Popular brands

Load more brands