7
INSTALLATION INSTRUCTIONS
Wall S leeve Brands:
#1 Emerson
15 Deep
1. Rem ove existing rear grille as shown on Page
6 of this manual and replace with provided
louvered rear panel. Install as shown here.
You may need to drill holes in flange of
existing sleeve to match new rear grille.
NOTE:
2. Attach(1)1 x3/8 x25 long seal in the center at
the top of the sleeve. R emove the backing paper
and press into position.
3. Attach the (2) 1 x3/8 x14 long seals to the
left and right sides of the sleeve.
4. Cut (2) 1
x3/8 x25 long seals to 14 long,and
attach it to the vertical sections of the rear grille
as shown.
5. Attach (2)4 x3
x1
centering/support blocks
one on each side wall. Place in center of side
wall with the tapered end fac ing the opening.
6. Gently slide unit into sleeve.
7. Before sliding all-the-way back, remove 2nd
screw from front on left side of unit.
8. Remove the plastic washer from the screw.
9. Scr ew and attac h the other end of the ground
wir e to the unit as shown in picture. Make sure
that the toothed washer is against the cabinet.
10.Slide the unit completely to the rear to ensure
a good seal, making s ure the ground wire does
not become tangled.
11.Seal & Fr ame the unit as described on page 17.
12. If you have difficulty with mounting the grill to
the sleeve, follow the instructions for direct
mounting on P age 16.
1
/
2
1
/
2
1
/
2
4
4
3
8
3
8
