Keysight E6610A, User And Programming Manual

Page: 7 / 108

1 Document Overview
Keysight E6610A User and Programming Guide 7
1 Document Overview
This document describes the operation of the Keysight E6610A Remote Radio Head
Tester. It outlines how to perform measurements using either the graphical user
interface (GUI) for manual set up and testing, or the SCPI command interface for
automated testing.
See the E6610A Startup Guide for detailed information on how to download and
install the GUI software and set up the E6610A to conduct a simple RF loopback test
to verify operation.
This document contains a less detailed version of the GUI software setup instructions
beginning with the section
GUI Installation and Initial Start-up.
A description how to configure the test system for testing a remote radio head begins
with the section
Hardware Connections.
Information about how to perform automated measurements using SCPI can be found
in the section
Using the SCPI Server . A full list and description of the SCPI commands
can be found in SCPI Command Reference .