Keysight E6610A, User And Programming Manual

Page: 38 / 108

8 GUI Menus and Measurement Displays
Hide Settings Box: This removes the Settings box from the left side of the GUI window
to provide more space to display measurements.
Show Full Screen: This expands the measurement display area to the full screen,
removing the title bar and menu/settings bars at the top of the window and the status
bar at the bottom. The Settings box setting is unchanged. To toggle full screen mode
on and off, use the Ctrl-F key combination.
Instrument Menu
Search: This serves the same function as the "Search" button on the GUI. The
software will search for any E6610As connected on the same network subnet. A
"search complete" message will appear when the software is done, and a list of
discovered instruments will appear in the box to the right of the Search button. Use
the drop-down arrow to see the complete list.
Connect: This serves the same function as the "Connect" button on the GUI. The
software will connect to the E6610A with the host name or IP address selected in the
box to the right of the "Search" button. A message will be displayed to report whether
the connection was successful.
Disconnect: This serves the same function as the "Disconnect" button on the GUI,
which appears after a successful connection has been made to an E6610A. Selecting
this function will end the connection to the E6610A.
Trigger & Reference Options: This opens a window for setting trigger inputs and
outputs and the source for the reference signal as shown below.
38 Keysight E6610A User and Programming Guide